Lumion BLOG

Feel the space with Lumion

January 27 2017

Step-by-step guide to making this striking render in Lumion 7

image

Above: Render made in Lumion 7

Find out how to transform a plain-looking 3D model into the impressive render shown above using only Lumion. Step-by-step this blog takes you through the process of creating something magical starting with importing your model right up to rendering it.

1. Import model

Save your model in your modeling software and then import it into Lumion

image

2. Find the right point of view in the scene

This takes practice but it’s a lot about image composition. For more about this subject read this earlier blog.

image

3. Select materials

Apply Lumion materials or import your own material textures and apply them to your model in Lumion.

image

4. Two-point perspective

Apply two-point perspective. It’s necessary here because of the many vertical lines in the image and because many architectural visualizations use 2-point perspective as a standard.

image

5. Add objects

Add some of the objects necessary to complete your scene and to get it looking more natural. In this image, the trees and a little grass have been added.

image

6. Adjust sun position

The sun is a key part of getting the lighting right and creating the right background for the model. Adjust the sun position until the lighting and the background look right. In this image we are searching for an evening mood.

image

7. Adjust shadows

Use the shadow effect to adjust the shadows. In general, they are important in adding reality to your image and to make objects look more like they belong where they are. In this one the shadow coloring has been adjusted to fit the sky color by emphasizing blue.

image

8. Adjust cloud

Adjusting cloud is a subtlety but in this case clouds have been smoothed to create the right feeling in the sky, without directing attention away from the architecture.

image

9. Add lights to buildings

It is always important to put lights inside buildings to make them look lived in and used, like they would be in real life.

image

10. Add outside lights

Add lights outside to lighten up some of the dark areas. Look at the building on the right of the image below, as well as the low building in the centre of the image with the red awning. Then compare the same areas with the unlighted image above. The overall aim is to make the street look more natural.

image

11. Add area lights

A new feature in Lumion 7. It’s important in tweaking the lighting and makes all the difference in the final render. In this step, area lights have been placed on the front of the glass shopping facades, as well as on the ground in front of the shop windows, to immitate light reflection from the ground.

image

12. Reflections

Reflections are critical. They are a key part of this render because the wet asphalt takes up such a large part of the image. In Lumion it’s possible to add ‘speedray’ reflections and reflection planes, using the reflection effect. The idea is to get high quality reflections. In this image, speedray reflections have been turned on and 5 reflection planes have been added to the large glass surfaces and the wet asphalt material. The difference it makes is quite obvious!

image

13. Exposure

The exposure effect is a single slider with a high impact. Exposure is adjusted at this stage as preparation for further tweaking of the lighting. The reduced exposure has the effect of decreasing the brightness while emphasizing colors.

image

14. People and cars

Add people and cars in the build mode of Lumion. The aim is to make the street more believable, as though it’s just a routine everyday scene.

image

15. Depth-of-field (DOF) effect

Apply a small amount of the depth-of-field effect. It immitates real camera optical behavior and the human eye expects to see some slight DOF effect when it looks at an image. It also has the side-effect of making light spots a little bit bigger, which makes them appear more natural. For example look at the lights in the upper levels of the building in the centre of the image. It’s a detail but helps take one step towards more realism.

image

16. Sharpness

This is a subtle effect which is controllable with one slider in Lumion. It enhances tiny details in an image and makes edges and material details sharper. It is added at this stage because it removes some of the bluriness introduced by the depth-of-field (DOF) effect, without removing its positive aspects.

image

17. Chromatic aberrations

A very small amount of the chromatic aberration effect has been added. It introduces a slight distortion to the image and adds another subtle element of realism. It simulates the natural aberrations of the lens of a camera. This is something which all lenses have and the human eye expects to see these artefacts in an image.

image

18. Analog color lab effect

Coloring is important and almost always needs tweaking. Plain looking colors should be adjusted to look more subtle. In this case the analog color effect has been used to emphasize the warm colors of the street. Before adding the effect, the street looks a bit grey but after adding, the greyness has been removed, the street looks warmer and is better contrasted in relation to the blue evening sky. 

image

19. Noise effect

The noise effect introduces noise artefacts into the image and simulates the natural imperfections of a camera. It adds another component of realism to the image.

image

20. Color correction

The color correction effect is another way to adjust the color. In this case, the color has been adjusted so that it’s more saturated and the color differences have been exaggerated.

image

21. Lens flare

A slight lens flare effect has been added and is visible around point light sources. Again, it’s an immitation of a natural optical effect of all lenses and contributes to increased realism.

image

22. Mass move effect

Cars have been added and animated. In the single images you don’t see the movement but you can simulate this with motion blur (the next effect to be added). 

image

23. Motion blur

Motion blur adds the feeling of movement to the image.  

image

24. Hyperlight

Last but not least, Hyperlight is added at the render stage. This is important to make sure that reflected light is properly handled in the image. It changes the image quite considerably. In this case the Hyperlight intensity slider was set at around 50%.

image
Go back...
Warning: include(wp-footer.v12.inc.php): failed to open stream: No such file or directory in /volume1/web/live/support.lumion.net.cn/blog.php on line 386 Warning: include(): Failed opening 'wp-footer.v12.inc.php' for inclusion (include_path='.') in /volume1/web/live/support.lumion.net.cn/blog.php on line 386
<